Operating Regulations of CNC Cutting Machine

Views: 139 Author: Site Editor Publish Time: Origin: Site

Mechatronics cutting machines are called CNC cutting machines. They drive the movement of the machine tool through a digital program. When the machine moves, the randomly equipped cutting tool cuts the object.

 

Prevent electric shock

When the power is on or the machine is running, please do not touch any electrical components in the electrical cabinet and console. Otherwise, electric shock may occur.

Please do not operate any switch knobs with wet hands to prevent electric shock.

 

Please do not check the wires or replace the electrical components when the power is on, otherwise you may get an electric shock or be injured.

 

Maintenance personnel with corresponding technical qualifications should strictly follow the electrical maintenance technical requirements before repairing the equipment. To prevent accidents.

 

Prevent fire

The working materials used by the cutting machine are flammable gases such as acetylene, propane, liquefied gas and other gases. Therefore, it is necessary to regularly check whether the entire gas path is well sealed.

 CNC cutting machine

The air source part of the CNC cutting machine should be far away from the open flame, and normal carbon dioxide or other corresponding fire extinguishing devices should be placed near it. The operator should control it in time when adjusting the fire to avoid fire.

 

Prevent damage

When the cutting machine is running, you should pay attention to whether there are people or other objects in front to avoid collision.

 

After each cut, the cutting torch should be raised to the highest point to avoid hitting the steel plate and damaging the cutting torch.

 

Mechanical maintenance personnel should ensure that the machine is stopped during maintenance. And put up a warning sign to avoid accidents caused by sudden operation of the machine.

 

When the machine is running for a long time, do not directly touch the heat sink and other heating components on the module with your hands to avoid burns.

 

Operation precautions

Before starting the machine, check whether there is any air leakage in the pipeline of the machine. Never start the machine if there is air leakage.

 

After starting the machine, check whether there are obstacles on the working surface and guide rails. If there are obstacles, they must be removed.

 

Operators are not allowed to leave their posts at will, and non-operators are not allowed to start the machine at will.

 CNC cutting machine

In the event of an emergency during operation, immediately press the red emergency stop switch to prevent accidents.

 

Pay attention to the command and coordination of special administrators when repairing and maintaining CNC.Before shutting down, close all air valves and release the remaining air in the air circuit.

 

If there is flashback in the pipeline, immediately cut off the power and gas. There must be a record of the malfunction of the machine.

 

Other matters needing attention

The controller must be disassembled before hoisting and transportation, and it must be transported without excessive vibration.

 

The CNC cutting machine prevents impact and collision during hoisting. And let the cutting torch run to the proper position of the frame to maintain balance.

 

The power supply connection and gas circuit layout should be strictly in accordance with the requirements of the drawings, and the wires and gas circuits should be of appropriate length.

 

If it is equipped with a plasma power supply, the electrical and gas connections must be strictly in accordance with the requirements of the plasma power supply manufacturer.


×

Contact Us